Total Lab Supplies - Everything for your laboratory

Total Lab Supplies - Everything for your laboratory
Our Head Office in St Helens

Friday, 21 February 2014

Lead.

Lead is a chemical element in the carbon group with symbol Pb (derived from the Latin: plumbum) and has the atomic number 82. It is a soft and malleable metal and has a bluish-white colour after being freshly cut, but soon tarnishes to a dull grey colour when exposed to air. It has a shiny chrome-silver luster when it is melted into a liquid.  Lead rarely occurs in its elemental form in the wild. It is typically found in ores along with copper, and in smaller quantities with zinc and silver.



Lead is used in building construction, lead-acid batteries, bullets and shot, weights, as part of solders, pewters, fusible alloys, and as a radiation shield.  It was also commonly used in pipes for many hundreds of years, giving rise to the English words, "plumbing", "plumber", "plumb", and "plumb-bob" -- words derived from the same Latin root with lead.




If ingested, lead is poisonous to animals, including humans. It damages the nervous system and causes brain disorders. Excessive lead also causes blood disorders in mammals. Like the element mercury, another heavy metal, lead is a neurotoxin that accumulates both in soft tissues and the bones. Lead poisoning has been documented from ancient Rome, ancient Greece, and ancient China.

Lead pigments were used in lead paint for white as well as yellow, orange, and red. Most uses have been discontinued due of the dangers of lead poisoning. Lead chromate is still in industrial use. Lead carbonate (white) is the traditional pigment for the priming medium for oil painting, but it has been largely displaced by the zinc and titanium oxide pigments. It was also quickly replaced in water-based painting mediums. Lead carbonate white was used by the Japanese geisha and in the West for face-whitening make-up, which was detrimental to health.

Tetraethyllead was used in leaded fuels to reduce engine knocking, but this practice has been phased out across many countries of the world in efforts to reduce toxic pollution that affected humans and the environment.

Lead is a highly poisonous metal (regardless if inhaled or swallowed), affecting almost every organ and system in the body. The main target for lead toxicity is the nervous system, both in adults and children. Long-term exposure of adults can result in decreased performance in some tests that measure functions of the nervous system. Long-term exposure to lead or its salts (especially soluble salts or the strong oxidant PbO2) can cause nephropathy, and colic-like abdominal pains. It may also cause weakness in fingers, wrists, or ankles.

For more information visit:-
http://en.wikipedia.org/wiki/Lead
http://www.theguardian.com/science/grrlscientist/2013/feb/15/1?guni=Article:in%20body%20link

Friday, 14 February 2014

14th Febrauary 1978

36 years ago on this day, Texas Instruments patented the first "micro on a chip".

It was actually the first speech synthesizer chip and was used in TI's famous Speak and Spell toy.

In 1976 TI began a feasibility study memory intensive applications for bubble memory then being developed. They soon focused on speech applications. This resulted in the development the TMC0280 one-chip Linear predictive coding (LPC) speech synthesizer which was the first time a single silicon chip had electronically replicated the human voice.

An integrated circuit or monolithic integrated circuit (also referred to as an IC, a chip, or a microchip) is a set of electronic circuits on one small plate ("chip") of semiconductor material, normally silicon.

Integrated circuits are used in virtually all electronic equipment today and have revolutionised the world of electronics. Computers, mobile phones, and other digital home appliances are now inextricable parts of the structure of modern societies, made possible by the low cost of producing integrated circuits.
ICs can be made very compact, having up to several billion transistors and other electronic components in an area the size of a fingernail. The width of each conducting line in a circuit can be made smaller and smaller as the technology advances; in 2008 it dropped below 100 nanometres and in 2013 it is expected to be in the tens of nanometres.


 
ICs have consistently migrated to smaller feature sizes over the years, allowing more circuitry to be packed on each chip. This increased capacity per unit area can be used to decrease cost and/or increase functionality.

Chips are used in everything now from Kettles and toasters to mobile phones and TV's.  They are an incredible invention which continue to develop and evolve.

Friday, 7 February 2014

Back in 1984

On this day in 1984....

The first untethered spacewalk was made by American Bruce McCandless II on February 7, 1984, during Challenger mission STS-41-B, utilising the Manned Maneuvering Unit. He was subsequently joined by Robert L. Stewart during the 5 hour 55 minute spacewalk. Such a self-contained spacewalk was first attempted by Eugene Cernan in 1966 on Gemini 9A, but Cernan could not reach the maneuvering unit without tiring.

Untethered U.S. astronaut Bruce McCandless uses a manned maneuvering unit. photo taken by Robert "Hoot" Gibson

The Manned Maneuvering Unit (MMU) is an astronaut propulsion unit that was used by NASA on three Space Shuttle missions in 1984. The MMU allowed the astronauts to perform untethered EVA spacewalks at a distance from the shuttle. The MMU was used in practice to retrieve a pair of faulty communications satellites, Westar VI and Palapa B2. Following the third mission the unit was retired from use. A smaller successor, the Simplified Aid for EVA Rescue (SAFER), was first flown in 1994, and is intended for emergency use only.

While orbiting around the Earth at a speed of 17,500 miles per hour, McCandless floated from the cargo bay into outer space, 150 nautical miles above Earth, an experience he described as "a heck of a big leap." Mission specialist Robert L. Stewart, an Army lieutenant colonel, also flew the MMU on shuttle mission 41-B.

While flying the MMU, these men were in a journalistic phrase of the time "human satellites." They checked out the equipment, maneuvered within the cargo bay, flew away from and back to the orbiter, performed docking exercises, recharged the MMU nitrogen tanks, and collected engineering data. The MMU, according to Martin Marietta's post mission report, "performed as expected and no anomalies were reported.

Gaseous nitrogen was used as the propellant for the MMU. Two aluminium tanks with Kevlar wrappings contained 5.9 kilograms of nitrogen each, enough propellant for a six-hour EVA depending on the amount of manoeuvring done. Typical MMU delta-v (velocity change) capability was about 80 feet per second (24.4 m/s).


There were 24 nozzle thrusters placed at different locations on the MMU. To operate the propulsion system, the astronaut used his fingertips to manipulate hand controllers at the ends of the MMU's two arms. The right controller produced rotational acceleration for roll, pitch, and yaw. The left controller produced translational acceleration for moving forward-back, up-down, and left-right. Coordination of the two controllers produced intricate movements in the unit. Once a desired orientation was achieved, the astronaut could engage an automatic attitude-hold function that maintained the inertial attitude of the unit in flight. This freed both hands for work.

Yet the MMU has not been used since 1984. There are several reasons for this. First, most extravehicular activities were effective without use of the MMU. Tethers, safety grips, hand bars, and other restraints allowed astronauts to work in the open cargo bay. Furthermore, the maneuverability of the Space Shuttle itself and the utility of the shuttle's robotic manipulator arm had proved capable of rescuing satellites-the primary function for which the MMU had been designed.



For more information visit:-
http://history.nasa.gov/SP-4219/Chapter13.html
http://en.wikipedia.org/wiki/Manned_Maneuvering_Unit

Friday, 31 January 2014

A word in your shell like.....

Ever put a sea shell to your ear and listened to the sea?  You've probably done it when you were young but have you ever wondered what it was you were listening to?


There are a number of ideas about what actually makes the 'wave' sound when you put a shell to your ear. One suggestion is that you're hearing the echo of your heart beating and the blood rushing around your body, in particular the blood vessels in your ear. But that's simply not true, because if you ran about a lot before putting the shell to your ear there would be a definite difference in the intensity of the 'waves' you hear. Why? Well, exercise of any sort increases you heart rate hence the waves would be louder, or more frequent, in time with the faster beating of your heart.

Another explanation is that the wave sound is created by air flowing through the shell, and this may have a little to do with it as the sound becomes louder when you lift the shell slightly away from your ear. However, if you put your ear to a shell in a soundproof room (where there is no ambient noise, but air is still cycling around the shell), the wave sound is noticeably missing. So, it must have something to do with outside noise.

When you hold up a shell to your ear, you block out direct noise to your ear. However, the shell captures any atmospheric noise, which then resonates inside the shell. This resonating chamber needs some noise to work with, but otherwise works regardless of whether your surroundings are noisy or not. However, it stands to reason that the louder the environment around you, the louder the sound inside the shell - as more sound waves are 'bouncing', for want of a better term, around the chamber. These frequencies are garbled by the walls of the chamber and become like radio static to us, as our ear is not finely tuned enough to distinguish every nuance. Thus you get that shhhhhh sound, like waves breaking on the sea shore.


The rushing sound that one hears is in fact the noise of the surrounding environment, resonating within the cavity of the shell. The same effect can be produced with any resonant cavity, such as an empty cup or even by simply cupping one's hand over one's ear. The similarity of the noise produced by the resonator to that of the oceans is due to the resemblance between ocean movements and airflow.

Noise from outside the shell also can change the intensity of the sound you hear inside the shell. You can look at the shell as a resonating chamber. When sound from outside enters the shell, it bounces around, thus creating an audible noise. So, the louder the environment you are in, the louder the ocean-like sound will be.

For more information visit:-
http://en.wikipedia.org/wiki/Seashell_resonance
http://h2g2.com/approved_entry/A46714665#conversations

Friday, 24 January 2014

Cobalt!

Cobalt is a chemical element with symbol Co and atomic number 27. Like nickel, cobalt in the Earth's crust is found only in chemically combined form, save for small deposits found in alloys of natural meteoric iron. The free element, produced by reductive smelting, is a hard, lustrous, silver-grey metal.


Cobalt-based blue pigments (cobalt blue) have been used since ancient times for jewellery and paints, and to tint glass blue, but the colour was later thought by alchemists to be due to the known metal bismuth. Miners had long used the name kobold ore (German for goblin ore) for some of the blue-pigment producing minerals; they were named because they were poor in known metals, and gave poisonous arsenic-containing fumes upon smelting. In 1735, such ores were found to be reducible to a new metal (the first discovered since ancient times), and this was ultimately named for the kobold.

Cobalt is primarily used as the metal, in the preparation of magnetic, wear-resistant and high-strength alloys. Its compounds cobalt silicate and cobalt(II) aluminate (CoAl2O4, cobalt blue) give a distinctive deep blue color to glass, ceramics, inks, paints and varnishes.

Cobalt blue tinted glass

Free cobalt (the native metal) is not found in on Earth, except as recently delivered in meteoric iron (see below). Though the element is of medium abundance, natural compounds of cobalt are numerous. Small amounts of cobalt compounds are found in most rocks, soil, plants, and animals.

Cobalt forms many useful alloys. It is alloyed with iron, nickel, and other metals to form Alnico, an alloy with exceptional magnetic strength. Cobalt, chromium, and tungsten may be alloyed to form Stellite, which is used for high-temperature, high-speed cutting tools and dies. Cobalt is used in magnet steels and stainless steels. It is used in electroplating because of its hardness and resistance to oxidation. Cobalt salts are used to impart permanent brilliant blue colours to glass, pottery, enamels, tiles, and porcelain. Cobalt is used to make Sevre's and Thenard's blue. A cobalt chloride solution is used to make a sympathetic ink. Cobalt is essential for nutrition in many animals. Cobalt-60 is an important gamma source, tracer, and radiotherapeutic agent.



For more information visit:-
http://en.wikipedia.org/wiki/Cobalt
http://www.theguardian.com/science/punctuated-equilibrium/2011/sep/02/1?guni=Article:in%20body%20link

Friday, 17 January 2014

18 years ago today - the Kobe Earthquake - Japan

Eighteen years ago to the day the Kobe earthquake shook Japan.  The Great Hanshin earthquake occurred on Tuesday, January 17, 1995, at 05:46 JST in the southern part of Japan. It measured 6.8 on the moment magnitude scale (USGS), and Mj7.3 (adjusted from 7.2) on JMA magnitude scale.  The tremors lasted for approximately 20 seconds. The focus of the earthquake was located 16 km beneath its epicentre, on the northern end of Awaji Island, 20 km away from the city of Kobe.

An earthquake is a quick release of energy in the Earth’s crust, creating seismic waves. The Earth’s crust is made up of tectonic plates. The tectonic plate edges move against each other all the time, but sometimes they get stuck. When this happens energy builds up to a point of rupture and the seismic energy is released.

The depth of an earthquake is very important.  If it is shallow it will cause much more structural damage to buildings than a deep one. On the Earth’s surface an earthquake will manifest itself by shaking buildings and the ground moving. If an earthquake occurs at sea it can move and displace the seabed. The water on the seabed of an ocean or large lake is normally very still, with waves only occurring near the surface, but if the seabed moves it can cause a deep and harmful that can result in a tsunami as happened in Japan in 2011.

In the Kobe earthquake, approximately 6,434 people lost their lives (final estimate as of December 22, 2005); about 4,600 of them were from Kobe.
A section of the Nojima Fault

The Great Hanshin earthquake belonged to a third type, called an "inland shallow earthquake". Earthquakes of this type occur along active faults. Even at lower magnitudes, they can be very destructive because they often occur near populated areas and because their hypocenters are located less than 20 km below the surface. The Great Hanshin earthquake began north of the island of Awaji, which lies just south of Kobe. It spread toward the southwest along the Nojima Fault on Awaji and toward the northeast along the Suma and Suwayama faults, which run through the center of Kobe. Observations of deformations in these faults suggest that the area was subjected to east-west compression, which is consistent with previously known crustal movements.

The earthquake proved to be a major wake-up call for Japanese disaster prevention authorities. Japan installed rubber blocks under bridges to absorb the shock and rebuilt buildings further apart to prevent them from falling like dominoes. The national government changed its disaster response policies in the wake of the earthquake, and its response to the 2004 ChÅ«etsu earthquake was significantly faster and more effective.  The earthquake and tsunami of 2011 though was much larger than anything that had been seen before causing almost 16,000 deaths.  There was little that could be done to stop such a force of nature.

A large amount of data was collected after the tsunami of 2011 that provides "the possibility to model in great detail what happened during the rupture of an earthquake." The effect of this data is expected to be felt across other disciplines as well, and this disaster will "provide unprecedented information about how buildings hold up under long periods of shaking – and thus how to build them better.

Earthquakes can strike at any time and are unpredictable in their nature.  Fortunately these types of earthquake are not that common.  Early warning systems are in place for many countries around earthquake hot spots so as to try and give people time to get to safety.

See also:-
http://en.wikipedia.org/wiki/Japan_tsunami
http://en.wikipedia.org/wiki/Kobe_earthquake
http://www.bbc.co.uk/learningzone/clips/a-geological-explanation-of-earthquakes/6736.html

Friday, 10 January 2014

Acetic Acid - Vinegar to you and me.....

Acetic acid is an organic compound with the chemical formula CH3COOH.  It's a colourless liquid that when undiluted is also called glacial acetic acid.

Acetic acid is the main component of vinegar (apart from water; vinegar is roughly 8% acetic acid by volume), and has a distinctive sour taste and pungent smell. Besides its production as household vinegar, it is mainly produced as a precursor to the manufacture of polyvinyl acetate and cellulose acetate - used in wood glue & fabrics and for photographic films respectively. Although it is classified as a weak acid, concentrated acetic acid is corrosive and attacks the skin.

Acetic Acid as Vinegar is known as the food additive E260.

Glacial acetic acid is the name for water-free (anhydrous) acetic acid. Similar to the German name Eisessig (ice-vinegar).  The theoretical freezing point of glacial acetic acid is 16.7 degrees Celcius. It got it's name because it's freezing point is only slightly below room temperature.

Glacial Acetic Acid

Vinegar was known early in civilization as the natural result of air exposure to beer and wine, because acetic acid-producing bacteria are present globally.


Vinegar is typically 4-18% acetic acid by mass. Vinegar is used directly as a condiment, and in the pickling of vegetables and other foods. Table vinegar tends to be more diluted (4% to 8% acetic acid), while commercial food pickling employs solutions that are more concentrated. The amount of acetic acid used as vinegar on a worldwide scale is not large, but is by far the oldest and best-known application.

Concentrated acetic acid is corrosive to skin and must, therefore, be handled with appropriate care, since it can cause skin burns, permanent eye damage, and irritation to the mucous membranes. These burns or blisters may not appear until hours after exposure. Latex gloves offer no protection, so specially resistant gloves, such as those made of nitrile rubber, are worn when handling the compound.

White vinegar is also known as distilled vinegar and is used for medicinal, laboratory, and cleaning purposes, having some anti-bacterial properties, as well as in cooking, baking, meat preservation, and pickling.

As you can see Acetic Acid is available in many strengths and so is suitable for food applications, cleaning applications (using white vinegar for example) to industrial applications and use in laboratories.

For more information visit:-
http://en.wikipedia.org/wiki/Acetic_acid
http://en.wikipedia.org/wiki/Acetic_acid_(data_page)
http://www.prlabs.co.uk/lab-supplies.php?N=ACETIC-ACID-100--ANALAR-NORMAPUR&Id=48739