New device produces hydrogen peroxide for water purification

Limited access to clean water is a major issue for billions of people in the developing world, where water sources are often contaminated with urban, industrial and agricultural waste. Many disease-causing organisms and organic pollutants can be quickly removed from water using hydrogen peroxide without leaving any harmful residual chemicals. However, producing and distributing hydrogen peroxide is a challenge in many parts of the world.

Purified drinking water

Now scientists at the Department of Energy's SLAC National Accelerator Laboratory and Stanford University have created a small device for hydrogen peroxide production that could be powered by renewable energy sources, like conventional solar panels.

"The idea is to develop an electrochemical cell that generates hydrogen peroxide from oxygen and water on site, and then use that hydrogen peroxide in groundwater to oxidize organic contaminants that are harmful for humans to ingest," said Chris Hahn, a SLAC associate staff scientist.

Their results were reported March 1 in Reaction Chemistry and Engineering.

The project was a collaboration between three research groups at the SUNCAT Center for Interface Science and Catalysis, which is jointly run by SLAC and Stanford University.

"Most of the projects here at SUNCAT follow a similar path," said Zhihua (Bill) Chen, a graduate student in the group of Tom Jaramillo, an associate professor at SLAC and Stanford. "They start from predictions based on theory, move to catalyst development and eventually produce a prototype device with a practical application."

In this case, researchers in the theory group led by SLAC/Stanford Professor Jens Nørskov used computational modeling, at the atomic scale, to investigate carbon-based catalysts capable of lowering the cost and increasing the efficiency of hydrogen peroxide production. Their study revealed that most defects in these materials are naturally selective for generating hydrogen peroxide, and some are also highly active. Since defects can be naturally formed in the carbon-based materials during the growth process, the key finding was to make a material with as many defects as possible.

"My previous catalyst for this reaction used platinum, which is too expensive for decentralized water purification," said research engineer Samira Siahrostami. "The beautiful thing about our cheaper carbon-based material is that it has a huge number of defects that are active sites for catalyzing hydrogen peroxide production."

Stanford graduate student Shucheng Chen, who works with Stanford Professor Zhenan Bao, then prepared the carbon catalysts and measured their properties. With the help of SSRL staff scientists Dennis Nordlund and Dimosthenis Sokaras, these catalysts were also characterized using X-rays at SLAC's Stanford Synchrotron Radiation Lightsource (SSRL), a DOE Office of Science User Facility.

"We depended on our experiments at SSRL to better understand our material's structure and check that it had the right kinds of defects," Shucheng Chen said.

Finally, he passed the catalyst along to his roommate Bill Chen, who designed, built and tested their device.

"Our device has three compartments," Bill Chen explained. "In the first chamber, oxygen gas flows through the chamber, interfaces with the catalyst made by Shucheng and is reduced into hydrogen peroxide. The hydrogen peroxide then enters the middle chamber, where it is stored in a solution." In a third chamber, another catalyst converts water into oxygen gas, and the cycle starts over.

Separating the two catalysts with a middle chamber makes the device cheaper, simpler and more robust than separating them with a standard semi-permeable membrane, which can be attacked and degraded by the hydrogen peroxide.

The device can also run on renewable energy sources available in villages. The electrochemical cell is essentially an electrical circuit that operates with a small voltage applied across it. The reaction in chamber one puts electrons into oxygen to make hydrogen peroxide, which is balanced by a counter reaction in chamber three that takes electrons from water to make oxygen - matching the current and completing the circuit. Since the device requires only about 1.7 volts applied between the catalysts, it can run on a battery or two standard solar panels.

The research groups are now working on a higher-capacity device.

Currently the middle chamber holds only about 10 microliters of hydrogen peroxide; they want to make it bigger. They're also trying to continuously circulate the liquid in the middle chamber to rapidly pump hydrogen peroxide out, so the size of the storage chamber no longer limits production.

They would also like to make hydrogen peroxide in higher concentrations. However, only a few milligrams are needed to treat one liter of water, and the current prototype already produces a sufficient concentration, which is one-tenth the concentration of the hydrogen peroxide that you buy at the store for your basic medical needs.

In the long term, the team wants to change the alkaline environment inside the cell to a neutral one that's more like water. This would make it easier for people to use, because the hydrogen peroxide could be mixed with drinking water directly without having to neutralize it first.

The team members are excited about their results and feel they are on the right track to developing a practical device.

"Currently it's just a prototype, but I personally think it will shine in the area of decentralized water purification for the developing world," said Bill Chen. "It's like a magic box. I hope it can become a reality."

For more information, visit:-

https://www.sciencedaily.com/releases/2017/04/170401090435.htm

http://www.prlabs.co.uk/lab-supplies.php?N=hydrogen-peroxide-6-wv-gpr-rectapur&Id=59163

Simple fats, amino acids to explain how life began

Life is a process that originated 3.5 billion years ago. It emerged when the basic components of the cells that we know today, in other words, inanimate chemical molecules, gradually joined, merged, assembled themselves and interacted. At a given moment they became alive, or what amounts to the same thing, they turned into autonomous systems. As the years passed they gradually evolved until achieving their current complexity and diversity. A piece of research by the UPV/EHU is working on the start of this trajectory by studying how the chemical molecules assembled themselves so that life could begin.

A section of DNA. Zephyris at the English language Wikipedia [GFDL (http://www.gnu.org/copyleft/fdl.html) or CC-BY-SA-3.0 (http://creativecommons.org/licenses/by-sa/3.0/)], via Wikimedia Commons

DNA, RNA, proteins, membranes, sugars, …cells are made up of all kinds of components. In biology, and in the studies dealing with the origin of life specifically, it is very common to focus on one of these molecules and put forward hypotheses on how life originated by analysing the specific mechanisms related to it. "Basically, these studies are looking for the 'molecule of life', in other words, they set out to establish which was the most important molecule in making this milestone happen," said Kepa Ruiz-Mirazo, researcher in the Biophysics Unit and of the UPV/EHU's Department of Logic and Philosophy of Science. However, bearing in mind that "life involves activity among a huge variety of molecules and components, a change of approach has been taking place in recent years and research that takes into account various molecules at the same time is gaining strength," he added.

Besides emerging in favour of this fresh approach, Ruiz-Mirazo's group, in collaboration with the University of Montpellier, through an internship of the UPV/EHU PhD student Sara Murillo-Sánchez, has been able to show that interaction exists between some molecules and others. "Our group has expertise in research into membranes that are created in prebiotic environments, in other words, in the study of the dynamics that fatty acids, the precursors of current lipids, may have had. 

The Montpellier group for its part specialises in the synthesis of the first peptides. So when the knowledge of each group is put together, and when we experimentally blended the fatty acids and the amino acids, we could see that there was a strong synergy between them."

As they were able to see, the catalysis of the reaction took place when the fatty acids formed compartments. As they are in an aqueous medium, and due to the hydrophobic nature of lipids, they tend to join with each other and form closed compartments; in other words, they take on the function of a membrane; "at that time the membranes obviously weren't biological but chemical ones," explained Ruiz-Mirazo. In their experiments they were able to see that the conditions offered by these membranes are favourable for amino acids. "The Montpellier group had the prebiotic reactions of the formation of dipeptides very well characterised, so they were able to see that this reaction took place more efficiently in the presence of fatty acids," he added.

Besides demonstrating the synergy between fatty acids and amino acids, Ruiz-Mirazo believes it is very important to have conducted the study using basic chemical components, in other words, molecular precursors. "Life emerged out of these basic molecules; therefore, to study its origin we cannot start from the complex phospholipids that are found in today's membranes. We have demonstrated the formation of the first coming together and formation of chains on the basis of molecular precursors. Or to put it another way, we have demonstrated that it is possible to achieve diversity and complexity in biology by starting from chemistry."

In his studies, in addition to the experimental work, Ruiz-Mirazo is working in another two spheres so in the end he is studying the origin of life from three pillars or perspectives: "firstly, we have the experimental field; another is based on theoretical models and computational simulations, which we use to analyse the results obtained in the experiments, and the third is a little broader, because we are studying from the philosophical viewpoint what life is, the influence that the conception held about life exerts on the experimental field, since each conception leads you to carry out a specific type of experiment," he explained. "These three methodologies mutually feed each other: an idea that may emerge in the philosophical analysis leads you to carry out a new simulation, and the results of the simulations mark out the path for designing the experiments. Or the other way round. Most likely we will never manage to find the answer to how life began, but we are working on it: all of us living beings on Earth have the same origin and we want to know how it happened."

For more information visit:-

https://www.sciencedaily.com/releases/2017/01/170112083719.htm

http://www.prlabs.co.uk/lab-supplies.php?N=300l-msia-darts-protein-ag&Id=19593

Filter Papers and Membrane filters.

Laboratory filter paper is a semi-permeable barrier placed perpendicular to a liquid or air flow. It is used to separate fine solids from liquids or air.

Filter paper comes in various porosities and grades depending on the applications it is meant for. The important parameters are wet strength, porosity, particle retention, flow rate, compatibility, efficiency and capacity.

There are two mechanisms of filtration with paper; volume and surface. By volume filtration the particles are caught in the bulk of the filter paper. By surface filtration the particles are caught on the paper surface. Filter paper is mostly used because even a small piece of filter paper will absorb a significant volume of liquid.

The raw materials are different paper pulps. The pulp may be from softwood, hardwood, fibre crops, mineral fibres.

For laboratory use filter papers are made in a variety of ways since specific applications require specific types of papers. The raw materials might be acid washed wooden fibres, carbon or quartz fibres.

In laboratories, filter paper is usually used with a filter funnel, Hirsch, or Buchner funnel.

Ashless filter paper is mainly used for gravimetric methods in quantitative chemical analysis.

 

The link here is useful as it contains a basic guide to choosing the right filter paper grade.


Glass fibre filters are commonly used in laboratories.  The manufacturer Whatman for example offers two types of glass microfiber filters manufactured from 100% borosilicate glass: binder free glass microfiber that is chemically inert and binder glass microfiber.

These depth filters combine fast flow rates with high loading capacity and the retention of very fine particle, extending into the sub-micron range. Glass microfiber filters can be used at temperatures up to 500°C and are ideal for use in applications involving air filtration and for gravimetric analysis of volatile materials where ignition is involved.

 

There are a number of manufacturers and include Whatman, Millipore, Sartorius, Munktell, Pall, Nalgene and more.

 

A Membrane Filter typically traps contaminants larger than the pore size on the addressed surface of the membrane. Contaminants smaller than the rated pore size may pass through the membrane or may be captured within the membrane by other mechanisms. Membrane filters are typically used for critical applications such as sterilising and final filtration.

A useful weblink can be found here.

 

When choosing a membrane filter a number of factors have to be considered, for example:-

• Depth vs Membrane filtration
• Chemical compatability
• Hydrophilic vs Hydrophobic
• Pore size
• Thermal stability

Filtration is a huge area to cover with a short blog article but hopefully the links will prove useful for anyone looking to broaden their knowledge.